- High reliability, energy saving
Adopting IGBT all-bridge inverter technology, greatly raise the efficiency and power factor of welding machine, adopting the peak current control technology, automatic protection from overheat, over/under-voltage, phase lacking, and so on.
Can be used during 260V-450V, can be used in different environment.
One knob to adjust relevant parameter, LCD menu, easy to operate.
The common welder can use expert database to realize the qualified welding without any adjustment. The senior welder can set parameters by themselves to meet their particular welding requirements.
- Friendly man-machine interface
Digital meter and big LCD to show the welding parameter, easy to operate.
Toward the stainless steel or other non-ferrous metal of below 10mm and mild steel of below 8mm, no graving or filling is needed, one-side welding two-side forming, high efficiency.
- Support DC plasma welding and pulse plasma welding
Pulse plasma welding, welding temperature can be controlled well, better the welding quality, fish-scale form can form automatically, and seam is more beautiful. Technical parameters
|Input power||3*380V 50Hz|
|Rated input capacity||12KVA||23.7KVA|
|Rated input current||18.2A||36A|
|Rated welding curr./volt.||300A/32V||500A/40V|
|Rated duty cycle||300A/32V-100%||500A/40V-60% 400A/40V-100%|
|Adjust. Range of welding curr.||20-300A||20-500A|
|Up/down-slop time of welding curr.||0-10S|
|Pre-gas sending time||4S-10S|
|Post-gas sending time||4S-10S|
|Pulse duty ratio||0-100%|
|Adjust. Range of plasma||0-10L/min|
|Cooling means||Circulated air cooling|
|Suitable metal||Ti, Ss, Cu, Ni, Ta, Hf, Cr, Cs|